WINWAY FREER— Face milling cutter special for aluminum alloy

Material of cutter

Milling cutter body

High strength alloy steel body and special treatment on the surface for better temperature and corrosion resistance. The diameter of cutters covers from 32 to 200mm.


Tungsten carbide inserts 

SE13 wiper design carbide inserts which have four cutting edges with different geometry and material, almost can use for all working conditions. There are large rake angle and unequal tooth pitch design on the milling inserts so as to reduce cutting power and reach high quality surface under unstable cutting condition.


Parameter during work / case


Cutting Material: 42 CrMo

Hardness: HRC 40

Cutter: MF45-100.6-SP13-B32

Insert: SEET13T3 K W130

Rough cutting:

Vc=125m/min

S=400r/min

F=480mm/min

Ap=5mm

fz=0.2mm/r

Finish cutting:

Vc=188m/min

S=600r/min

F=360mm/min

Ap=0.5mm

Fz=0.1mm/r

Roughness:

Ra=1.6